Inkjet printers are generally very low maintenance machines and they also cost less than the laser printers. In spite of the fact that some manufacturers are currently retiring the inkjet printers, they are still a common fixture in many organizations. They are virtually everywhere, especially amongst the small businesses. Because they are also likely to breakdown or malfunction in the course of use, it is important to master some simple inkjet printer repairs as well as troubleshooting that you can apply in order to avoid the inconveniences and downtimes caused by printer breakdowns.

inkjet printer repairs

One advantage of the inkjet printers is that they are not as complex as their laser counterparts. Due to this, you are unlikely to grapple with numerous breakdowns or issues like in the laser printers. The simplicity in the design means that there is very little that can go wrong with these printers. Still, you have to invest in professional inkjet printer repair services in order to keep them working in top condition. The low cost of the inkjet printers also means that you do not have to invest too much in the inkjet printer repairs if it is no longer sustainable. These printers aren’t generally built to last anyway.

Most of the problems that occur in the inkjet printers are either communication problems or problems with poor print quality in the printers. There are certain issues that generally occur more commonly in the inkjet printers. These include the following:

The printhead and print quality

The most common issue that you will face is the general poor print quality of these printers. These will occur on the printers in the form of the white horizontal lines in every line of print. The most common cause of these is clogged nozzles which fail to dispense ink. The printhead can be replaced in some cartridges although there are some manufacturers that are going around this is by integrating the printhead into the ink cartridge.

Clean your printhead

If the printhead is not disposable, then you will have to carry out regular cleaning of the printhead using a clean cotton swab. You can rub a little alcohol on the cotton and use it to wipe away the printhead face. The alcohol is going to dissolve the ink that is clogged on the pores of the printheads. After doing the manual cleaning, you can put the ink cartridges back in place and power on the printer’s built-in cleaning process.

Check the printhead ribbons

Sometimes, the issue is actually with the ribbons that connect to the printheads of the inkjet printers. The ribbon may be loose or broken thus not transmitting all the instructions to the printheads, thus resulting in the poor printer quality such as the white horizontal lines. It is always important to ensure that the ribbon is firmly secured to the printhead before you begin your printing. If problems with poor quality persist, you can contact professional inkjet printer repairs experts in your local area in order to assist you in troubleshooting and diagnosing your inkjet printers. You can also get expert GOM inkjet repair advice at http://gom.com.au/blog/inkjet-repair-advice-from-the-experts-at-hp-canon/. 

Leave a Reply

Your email address will not be published. Required fields are marked *